Can I Build a Granny Flat on My Sydney Property?

Concept illustration of a Sydney residential property, proposed granny flat footprint and property planning map; not a completed project or approval

Possibly — but your address, planning controls, proposed design and site conditions all matter. In NSW, a granny flat is generally called a secondary dwelling. A promising floor plan alone cannot tell you whether it can be approved or delivered on a particular Sydney property. The useful first step is to gather your property details and identify the questions a council, accredited certifier and project team will need to answer.

What counts as a granny flat in NSW?

The NSW Department of Planning's secondary dwellings guide describes a secondary dwelling as self-contained accommodation within, attached to or separate from another dwelling on the same site. The department says that secondary dwellings are permitted in residential zones, with other zones depending on the applicable local environmental plan. The proposal still has to satisfy the relevant planning and development standards; zoning is only the start of the assessment.

Five questions to check before choosing a design

1. What planning controls apply to your address?

Use the NSW Planning Portal Spatial Viewer to look up your address or lot. Service NSW explains that the viewer provides property planning information. Note the land-use zone and any relevant planning layers, then check the applicable council requirements. A map result is useful for screening, but it is not a project approval.

2. Is there a principal dwelling, and which approval pathway may apply?

NSW Planning says a granny flat proposed as complying development must be associated with a principal dwelling and be on the same lot. A council or accredited certifier can issue a complying development certificate (CDC) when all applicable standards are met. If a proposal does not satisfy the complying development requirements, a development application (DA) to the local council may still be possible. Read the NSW Planning overview and discuss the actual property with a qualified professional before assuming either pathway applies.

NSW Planning says a secondary dwelling generally needs a lot of at least 450 m² for the CDC pathway. It notes an exception where the secondary dwelling is entirely within an existing house. A smaller lot may still be considered through a DA; reaching 450 m² alone does not establish that a proposal qualifies for CDC.

If you hope to sell the new dwelling on a separate title, read our Sydney granny flat subdivision and separate-sale guide before treating a secondary dwelling concept as a two-title project.

3. Are there site constraints that need specialist review?

Flood or bushfire considerations, trees, easements and other site-specific controls may change the design or approval pathway. The property search is a starting point; a survey, council records or specialist advice may be needed to understand a particular constraint. Do not rely on a general granny flat article to clear a property for construction.

4. Can the proposed building be delivered and connected?

The usable space on the lot, access from the street, the position of the existing home and connections to services all affect a modular project. For an initial discussion, photos of the driveway, side access and proposed location are often more useful than a preferred floor plan alone. A site visit and technical design may be needed before a firm scope and quote can be prepared.

5. What do you actually need the space to do?

Think about who would use the dwelling, the number of rooms you need, privacy from the principal home and your intended timing. That brief helps identify relevant concepts, but a concept must still be adapted to the property and checked against the applicable rules.

When is a Section 10.7 planning certificate useful?

The NSW Planning Portal Spatial Viewer is a useful first screen. For a council-issued record of the planning controls and restrictions affecting a particular parcel of land, you can request a Section 10.7 planning certificate (formerly called a Section 149 certificate). It informs a site discussion; it is not a complying development certificate (CDC), development consent or confirmation that a chosen granny flat design can be built.

Which certificate? A Section 10.7(2) certificate shows the property's zoning, relevant state, regional and local planning controls, and recorded constraints such as land contamination, flooding and bushfire prone land. A combined Section 10.7(2) and 10.7(5) certificate adds advice from other authorities and certain further information held by council. Ask your council or planning professional which version is useful for your project; the extra information can help you frame follow-up questions about a flagged constraint.

How do you obtain and use it? NSW Planning says its online certificate service is available where councils have chosen to adopt it. Check whether your local council accepts online applications; Service NSW says you can request a certificate on its own or in connection with a DA or CDC application, and a service fee applies. If online requests are unavailable for your council, contact it for the current process. Keep the certificate with your survey, site photos and proposed building location when you discuss the approval pathway.

A certificate may flag a constraint that needs closer review. Its contents should be checked against the proposed design and current council requirements; it does not replace a survey, specialist assessment or approval decision.

What should you prepare for an initial land assessment?

You can start with:

  • the property address and, if available, lot details or a recent survey;
  • photos of the yard, the existing dwelling and access from the street;
  • any known easements, significant trees, drainage issues or flood/bushfire information;
  • the intended use, preferred room layout and approximate project timing; and
  • questions you already have about approval, services or delivery.

You do not need to resolve every issue before asking. The purpose of an initial assessment is to identify what needs checking next. A formal approval decision belongs to the council or accredited certifier under the applicable pathway.

Explore a concept, then check the site

If a three-bedroom layout is of interest, you can view AIVEO's G8 granny flat concept. Its drawings are a starting point for a design conversation, not proof that the model fits your lot or has approval. Share your property details with AIVEO so the discussion can focus on your site, intended use and the questions that need professional review.

Request a free initial land assessment

Common questions

Can property size alone tell me whether I can build?

No. Size is one of several considerations. The relevant approval pathway also depends on planning standards and the proposal itself. NSW Planning notes that a proposal that does not meet the complying development requirements may still be considered through a DA.

Does choosing a modular granny flat remove the need for planning checks?

No. The way a building is made does not establish that it is suitable or approved for a particular address. Check the property and proposed design before treating any concept as buildable.

Who confirms the approval pathway?

A council or accredited certifier can assess whether a CDC pathway applies; a DA is considered by the relevant council. An initial AIVEO discussion can help organise your brief and the site information needed for that assessment.

Official sources

Planning guidance can change. Recheck these official pages and the current controls for your property before relying on this article for a project decision.